Lifegard Aquatics AquaStep Pro UV Sterilizer – 25W Shipped by Lifegard Aquatics in 3-5 business days

$169.99

SKU: RB8115 Category:

Description

Step Up to a New Lifegard Technology!
AquaStep Ultraviolet Sterilizer

For use in the following applications: Installed in a hanging position or underneath aquarium tanks to kill disease causing micro-organisms. Also use inside pond filters or skimmers to kill free floating algae.

Features:

  • Internal Step Design. Directs water back and forth across UV light tripling the contact time through the unit.
  • Ease of Replacement. Unique 4 pin connector for easy bulb replacement without shutting down the system.
  • Clear View Port. Allows visible light (no UV) to pass through and indicated bulb is operating.
  • Adjustable Clamp. Spring loaded clamp creates a snug fit to any aquarium or reservoir tank.
  • UV Bulb. Highest quality, pure hard quartz material allows maximum UV transmission and longer bulb life.
  • Compression Coupling and Gasket. Creates water tight seal at quartz sleeve and around ballast cord.
  • Electronic Ballast. 10W, 15W and 25W high output UL listed ballast.
  • Versatile. Inlet and outlet at top for hang on and at bottom for below aquarium installations. Use inlet ports on each side to connect multiple units together for any size requirement.
  • Distribution Plate. Evenly distributes water into chamber.
  • Plugs. Plug off inlet ports not in use. Can be removed to drain or clean unit.
  • Free Standing Base. Holds AquaStep in place for installations below or beside aquarium.
  • Design. Innovative design creates more volume area for increased contact time. Flat side allows snug fit to any aquarium or reservoir tank.
  • High Capacity. More capacity than any other make of equal height due to shape of chamber and step design.
  • Water Fall. Increases oxygen level by spreading out a thin sheet of gently falling water.
  • Adjustment Screws. Keeps unit level when installed in hanging position on tank.
  • Injection Molded Construction. Heavy duty thick wall ABS injection molded parts. Built to last.

Specifications:

  • Inlet: 1 1/4″ Slip or 3/4″ FPT
  • Outlet: 1 1/4″ Slip or 3/4″ FPT
  • Dimensions: 7.5″W x 3″L x 23″H
  • Flow Rate: Up to 760 GPH
  • UV Wattage: 25W